Zeks Eclipse Desiccant Dryers

Desiccant dryers, also referred to as regenerative dryers, use desiccant media to adsorb moisture and contaminants from compressed air. The desiccant media can be regenerated, or purged of the moisture it collects, and used again and again. Our desiccant dryers use this process to dry compressed air to very low dew points of either -40°F, […]
Zeks Heatsink Refrigerated Air Dryer

Energy Saving Dryers HeatSink® Cycling Dryers ZEKS HeatSink refrigerated dryers ensure that energy is consumed in proportion to actual demand for dried compressed air. The dryer refrigeration system automatically cycles on and off to maintain stored cooling energy in a cold thermal storage module. Every model incorporates efficient heat exchangers – designed specifically for compressed […]
AIM Tire Inflation System

The AIM AIR tire inflation station is designed for automatic tire inflation with a digital controller. Set the required air pressure and attach hose to tire with clip-on hose end. Unit will automatically inflate the tire to the desired pressure and signal when finished. Remove the hose and let the self-retracting reel pull the hose […]
Atlas Copco GA VSD+

Atls Copco GA VSD+ Atlas Copco’s GA VSD+ range brings a game-changing innovation to the general industry. The GA 7-37 VSD+ variable speed drive compressor reduces your energy consumption by a staggering 50% on average, compared to idling compressors. At the same time it offers improved performance, silent operation (down to 62 dB(A)) and a […]
Service

AIM believes that its service department is the best in the business. Capabilities range from minor repair of your smallest pump to complete overhaul of your plant air compressor package, or the largest pump you have. Our servicemen are factory trained professionals, and our fleet of service vehicles allow us to perform repairs right in […]
Atlas Copco Reciprocating Air Compressors

Reciprocating Air Compressors Reciprocating air compressors are positive displacement machines, meaning that they increase the pressure of the air by reducing its volume. This means they are taking in successive volumes of air which is confined within a closed space and elevating this air to a higher pressure. The reciprocating air compressor accomplishes this by […]
Fabrication Packages

Our craftsmen and our fully equipped, modern shop combine to form the best fabrication facility in the region. We can assemble complete packages incorporating compressors, blowers, pumps, motors, dryers, silencers, receivers, heat exchangers, control systems, or any custom equipment you need. AIM will use your design, or if you prefer, our application specialists and engineers […]
Atlas Copco Rotary Screw Compressors

Rotary air compressors are positive displacement compressors. The most common rotary air compressor is the single stage helical or spiral lobe oil flooded screw air compressor. These compressors consist of two rotors within a casing where the rotors compress the air internally. There are no valves. These units are basically oil cooled (with air cooled […]
Syn-Flo 80XP

Syn-Flo 80XP Is a Polyalphaolefin base product (PAO) with a state of the art additive package that makes Syn-Flo 80XP one of the world’s finest compressor lubricants. It is recommended for use in rotary screw and reciprocating compressors. It is a 10,000 hour oil. Syn-Flo 80XP will provide the customer with the following protection: Wide […]
AIM-BLOWER OIL 220

PREMIUM SYNTHETIC LUBRICANT APPLICATIONS: AIM-Blower Oil 220 is formulated from premium polyalphaolefin (PAO) base fluids, optimized for use in positive displacement blowers and vacuum pumps. Custom blended to provide outstanding protection even in demanding operating conditions. AIM-Blower Oil 220 is designed to withstand blower discharge temperatures up to 250o F. Formulated for maximum equipment life […]